Subscribe to the newsletter to receive updates about new products.
USB Female Head to Dip, 2.54mm Direct 4P Adapter Board, USB to 2.54mm Pin
USB Female Head to Dip, 2.54mm Direct 4P Adapter Board, USB to 2.54mm Pin is very useful if you want to link a project with a USB connector for the power supply or data exchange. Standard size USB 2.0 socket mounted on a small PCB. No delicate soldering required. This USB connector can be easily attached to your projects
It’s a USB 2.0 female connector. Connector quality is fine, the board is good with two 3mm mounting holes. The easy way to add a USB port to your project without fiddling with SMD bits. Convenient breakout for USB. Useful for quick prototypes: measurements and/or connections for Arduino projects using USB power supplies and signals. This has to be always in your stock, always an on-demand product, use it for internal sub repair everywhere
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your raspberry pi but was still small enough that the ghosts wouldn't notice it?
Luckily, the Spy Camera for Raspberry Pi is smaller than a thumbnail with a high enough resolution to see people, or ghosts, or whatever it is you're looking for. It's about the size of a cell phone camera - the module being just 8.5mm x 11.3mm - and has a stick-on back so it's easy to mount in a doorbell or behind a teddy bear's eye (might as well be creative!)
The camera comes with a 289mm (11.4") long cable so you can extend and mount your Pi away from the camera. it attaches to your Raspberry Pi by way of one of the two small sockets on the board upper surface. This interface uses the dedicated CSI interface, which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data. The Raspberry Pi NOT INCLUDED
The camera is connected to the BCM2835 processor on the Pi via the CSI bus, a higher bandwidth link which carries pixel data from the camera back to the processor. This bus travels along the ribbon cable that attaches the camera board to the Pi. The ribbon cables is not compatible with the Pi Zero and we do not have an adapter, check out the 'classic' Raspberry Pi cameras for Pi Zero use
The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.
Ultrasonic Mist Maker Humidifier, 5V Atomization Disc 108KHz Mist Atomizer DIY Humidifier with PCB, DIY Mist Atomizer Micro USB Board Ultrasonic Atomization Module for Home
Are you sure you want to remove this product from cart?