Description

ESP adapter plate compatible with the ESP07, ESP08, and ESP12. Because soldering the ESP module is not always easy, this adapter plate is available. The WiFi module can be soldered to the PCB, wherein they are connected to connection points clearly indicated by headers.

On the bottom layer, there is a land-pattern for a 3.3V regulator. To use 3.3V regulator you will need to desolder 0 Ohm jumper resistor R1. The VCC pin then becomes 4.5V to the 9V power input.

Features :

1. It features reserved land-pattern for the 3.3V regulator
2. It has Pinouts on the top layer in black color.
3. Compatible with ESP07, ESP08, and ESP12
4. It includes a 10K pull-up resistor populated on PCB.