• Has IC: MPU-6050.
• Imported from India (Sizes & Specifications are based on the India Market) .

The GY-521 module is a breakout board for the MPU-6050 MEMS
(Micro Electro Mechanical Systems) that features a 3-axis
gyroscope, a 3-axis accelerometer, a digital motion processor
(DMP), and a temperature sensor. The digital motion processor can
be used to process complex algorithms directly on the board.
Usually, the DMP processes algorithms that turn the raw values
from the sensors into stable position data. The sensor values are
retrieved by using the I2C serial data bus, which requires only
two wires (SCL and SDA).

Wiring scheme:

The GY-521 breakout has eight pins:

1. VCC (The breakout board has a voltage regulator. Therefore,
you can connect the board to 3.3V and 5V sources.)
2. GND
3. SCL (Serial Clock Line of the I2C protocol.)
4. SDA (Serial Data Line of the I2C protocol.)
5. XDA (Auxiliary data => I2C master serial data for connecting
the module to external sensors.)
6. XCL (Auxiliary clock => I2C master serial clock for
connecting the module to external sensors.)
7. AD0 (If this pin is LOW, the I2C address of the board will be
0x68. Otherwise, if the pin is HIGH, the address will be 0x69.)
8. INT (Interrupt digital output)