F450 Multi-Copter Quadcopter
Description:
Features:
Built from quality glass fiber and polyamide nylon.
Integrated PCB connections for direct soldering of your ESCs
Pre-threaded brass sleeves for all of the frame bolts.
Colored arms for orientation to keep you flying in the right direction.
Large mounting tabs on main frame bottom plate for easy camera mounting.
Easy assembly.
Specs:
Width: 450mm
Height: 55mm
Weight: 280g (w/out electronics)
Motor Mount Bolt Holes: 16/19mm
Wheelbase: 17.7in/450mm
Made by advanced engineering material,super strong & smooth
Kit(need you assemble yourself)
100% Brand new
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
Features:
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
Specifications:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5611 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
2212 920kv Motor
- Type : 22 x 12mm
- KV: 920rpm/V
- Voltage: DC 7-12V
- Weight: 53g
ESC Specs:
Cont. current: 30A
Max. current: 35A
Input Voltage: 2-4S lipo / 4-12 cell Ni-MH/Ni-Cd
BEC: 5V 2A (Linear mode)
Size: 55x26x8mm (length 145mm including power cable)
Weight: ~24g
NOTE:Before connect with the computer, you need to insert the SD card first , then flash the program, otherwise the LED indicator will not light up.
Please make sure you read these wikis and videos before you use.
Package lsist:
Flysky i6 remote control x 1
F450 frame kit(unassmebled,arm colors random)
Pixhawk 2.4.8 32bit ARM Flight Controller or Radiolink Pixhawk or NAZA m lite x 1
anti-vibration Shock Absorber Board X1
2212 920kv motor x 4(color random)
Runcam strap x 1
30A esc x 4
Safety button x 1
Buzzer x 1
PPM without shell x1
M8N GPS w/ holder or SE100 GPS x 1 (color random,according to warehouse, the gps connector will post to you at random,you have to adjust it by yourself ,if you signed a gps with APM connector )
Micro SD Adapter x1
I2C Splitter Expand Module x1
Power Module x 1
9450 propeller x 2 pairs color random
RGB(without shell )X1
note: component little different than picture component list
