+965 51122049
| Supply Voltage | 4.75 – 5.25Vdc |
| Maximum Clock Frequency | 40Mhz |
| Power Dissipation | 2mW/gate @100kHz |
| Minimum Output Current | 8mA |
| Propagation Delay | 10nS |
| Fan Out (TTL Loads) | 20 |
| Pin No | Pin Name | Description |
| 1 | A1 | AND Gate 1 Input 1 |
| 2 | B1 | AND Gate 1 Input 2 |
| 3 | A2 | AND Gate 2 Input 1 |
| 4 | B2 | AND Gate 2 Input 2 |
| 5 | C2 | AND Gate 2 Input 3 |
| 6 | D2 | AND Gate 2 Output |
| 7 | GND | Ground |
| 8 | D3 | AND Gate 3 Output |
| 9 | A3 | AND Gate 3 Input 1 |
| 10 | B3 | AND Gate 3 Input 2 |
| 11 | C3 | AND Gate 3 Input 3 |
| 12 | D1 | AND Gate 1 Output |
| 13 | C1 | AND Gate 1 Input 3 |
| 14 | VCC | Positive Supply |
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
IR Break Beam Sensor – 5mm leds
This IR break beam sensor works by detecting an object breaking a beam of IR light. This particular sensor has a range of up to 50 cm / 20″ and can be used with 3.3 or 5V.
raspberry pi 5 4gb With a 64-bit quad-core Arm Cortex-A76 processor at 2.4GHz,
